Rotating Your Tires – A DIY Guide

Ever wondered why you should bother rotating your tyres? Well, it can save you a large amount of money and help you understand your vehicle in a better way.

It needs to be understood that the tire rotation evens out the wear of your tyres,  as it allows each of the tyre to function in different parts of the vehicles’ wheel position. Resulting in the extension in the life of your tires. In addition to that, there are many mileage warranties that deem it necessary for an owner to do frequent tire rotation in order to make sure the warranty remains valid for a long time.

But before you plan on extending the life of your tyres, make sure the ones that you buy are of trusted quality especially, if transportation plays a huge part in your business. We would recommend you to buy Dunlop SP Van01 — light truck tyres that give excellent mileage and outstanding performance on all kinds of roads

Next, you may wonder how often you should rotate your tires. Most tire companies recommend every 3000-5000 miles which is about the same time as your oil change.

So, now you know it’s time to rotate your tyres. But perhaps you dread the thought of another trip to the service station. Why not master how to manage it yourself?

With this guide, we will walk you through the process so you can feel confident about how to rotate your tyres.

Collect All the Gadgets and Supplies You Will Need:

  • Air compressor
  • Hose
  • Fittings
  • Air-powered impact wrench
  • Impact sockets
  • Car Jack
  • 4 Jack Stands
  • Torque wrench

Determine the Rotational Pattern Of Your Vehicle

Next, you want to determine the correct rotational pattern for your vehicle. Be sure to check your vehicle manual for the recommended rotation pattern. If you have a front-wheel-drive vehicle, rotate the tyres in a criss-cross pattern. If you have a rear-wheel, rotate the tires in a front-to-rear and rear-to-front pattern.

Precautions to Look Into

  • While you are rotating your tyres, it’s a good idea to check the air pressure in your spare tire. Add the air pressure as required by your vehicle. The optimum air pressure for a vehicle can be checked in its owner’s manual.
  • Next, you want to be sure to learn your wheel lug torque specifications. The wheel lug torque is set to the suggested specification for your vehicle for proper installation. Sometimes these torque specifications can also be found in your manual guide. You may need to refer to your vehicle shop manual or obtain them from your vehicle dealer service provider.
  • Be careful as over-tightening a wheel can lead to stripping a lug nut or a hub. You may even stretch or break a stud or bolt and cause the wheel brake rotor and/or brake drum to distort.

Start Replacing and Rotating Your Tyres

Let’s get into the tire rotation process.

Step 1:

Take out the spare if it matches the wheels and tires on the vehicle

Step 2:

Jack up the vehicle and place it on four jack stands. You will jack up all four corners of the vehicle and place a jack stand under each corner. See the owner’s manual for correct lift points and jack stand placement.

Step 3:

Remove the tires using an impact wrench and impact socket. Remove the wheel and rotate the tyres according to the pattern chosen for your application.

Step 4:

Put the tyres back on the vehicle. Always start adding your lug nuts by hand to avoid cross-threading. Snug the lug nuts and do not overtighten.

Step 5:

Lower the car, off the jack stand, one axle at a time.

Step 6:

Use a torque wrench and socket to tighten the lug nuts to correct torque. There are many styles of torque wrenches available in the market

Step 7:

Replace the spare tire

Now you can save time and money by rotating your own tyres!